GE 2-9752 - Manual (Page 5)

3
D
ESKTOP
I
NSTALLATION
1. Plug the telephone line cord into the base and into a modular jack.
2. Plug the power supply cord into the base, into an AC outlet.
3. Set the PULSE/TONE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don’t know which type of service you have,
check with the phone company.
4. Raise the base antenna.
1
2
PULSE/TONE switch
PHONE NO.
1
2
3
4
5
6
7
8
9
0
CHARGE
IN USE
PAGE / FIND
RINGER
OFF ON
VOLUME
CHANNEL
FLASH
3 2 1 DEF ABC
JKL MNO GHI
TUV WXY
4 6 5
9 8 7 PRS
TONE OPER # * 0
MEMORY REDIAL
PHONE
RINGER switch CHARGE/IN USE light
5. Turn on the RINGER switch so the
handset rings for incoming calls.
6. Place handset in the base to charge
for 12 hours. The CHARGE/IN USE
light comes on indicating that the
battery is charging.
NOTE: Use only the Thomson
power supply that came with this
unit. (5-2412 for model 2-9752 or
5-2411 for models 2-9751 and
2-9753) Using other adapters may
damage the unit.
4
3