beautypg.com

GarrettCom Hardened Ethernet Switches P62F User Manual

Page 29

background image

Magnum P62-Series Hardened Switches Installation and User Guide (12/02)

25

www GarrettCom com

.

.

3.3.2

Power the P62-5V models w/Ext AC Power Supply (PSX-A)

The rugged Magnum P62-5V Hardened Switch, mainly used in “outdoor” Ethernet

applications at extended temperatures, also supports universal AC power input from 85-275 vac

50-60Hz through a separate Power Source unit, the PSX-A. The wide range of AC power input

qualifies this product for use worldwide, in almost any temperature environment. The AC power

source (PSX-A) provides a rugged power supply enclosed in a metal case that also acts as a heat

sink, enabling extended application temperatures to be accommodated. The PSX-A also includes

surge protection to withstand AC power input upsets, such as might result from nearby lightening

strikes. Shock and vibration characteristics enable use in transportation applications such as road-

side boxes for traffic control. The DC power output cord comes with a military-style screw-lock

female plug for secure attachment to the P62-5V Switch.

Input Voltage: 85-264 VAC, 47-
63HZ, Auto-ranging

AC Power Connector: IEC-type,
male recessed
Wiring Pin out (P62F-5V) Power
Adaptor:
Pin 1

+ve voltage (white wire in the cable)

Pin 2

-ve voltage (black wire in the cable)

Pin 3

chassis ground (green wire in the cable)

Pin 4

not used

Power Output : 5VDC, 3Amps max

Input Fuse for overload and short protection: 3AG type, 0.5 Amp; spare is included

Power Capacity: 15 watts output, 70% min efficiency

Surge Protection: over 150 joules, with clamping at 800V 50A min.

Operating Shock and Vibration: meets Bellcore GR-63-CORE Sections 4.4.1 and 4.4.3

NOTE : For best results at high-temperature, fasten the metal case of the PSX-A unit to be in
contact with a vertical surface (such as pedestal) that has good heat conducting properties.
Remove rubber “feet”, if present, to enhance metal-to-metal contact and provide the best heat
transfer away from the PSX-A unit.

3.3.3

Power the P62-5V w/DC Pwr Supply (PSX-T) at 125/250 VDC

The rugged Magnum P62-5V Hardened Switch also supports 125V/250 VDC power

through a separate Power Source unit, the PSX-T. The wide range of AC power input qualifies