GE 20621 - Manual (Page 8)

8
Using Your Remote
Code Identification
The Code Identification Feature allows you to identify the 4-digit
library code stored under your device button. For example, if you
want to find out what 4-digit code is stored under your TV device
button, follow the six steps below:
1. Press and hold the SETUP button until the red
indicator stays on. Release the SETUP button.
2. Press and release the desired device button (TV,
DVR, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red
indicator blinks once and remains lit.
4. To find the first digit for the code stored under the
device button pressed in step 2, press each numeric
button from
0-9 in turn. The number
that causes the indicator light to blink
is the first digit in your code.
. To find the second digit, repeat step 4,
this time when the red indicator blinks
off this is the second digit.
6. Repeat step 4 to find the third and
fourth digits.