beautypg.com

Problem solver, Questions? before you call for service, The problem solver – GE Monogram ZDP36N4R User Manual

Page 37

background image

37

Questions?
Before you
call for
service…

PROBLEM

POSSIBLE CAUSE

BURNERS DO NOT

Electrical plug is not plugged into a live power outlet.

LIGHT OR SPARK

Gas not turned on.

RANDOMLY

Burner parts not replaced correctly.

Holes in the simmer rings or slits in the burner rings are clogged.

Clogged orifice, or wet burners or electrodes.

BURNERS HAVE

Burner parts not replaced correctly.

YELLOW OR
YELLOW-TIPPED
FLAMES

If burner flames look like (A), call for service. Normal burner flames
should look like (B) or (C), depending on the type of gas.

BURNER FLAMES

If cooktop is connected to LP gas, contact the person who installed

VERY LARGE

your range or made the conversion.

OR YELLOW

BURNER CONTROL

When the knob is at the OFF position, it must be pushed in before

KNOB WILL NOT

it can be turned, and it can only be turned in a counterclockwise

TURN

direction. Similarly, when the knob is in the LOW or X-HI
positions, it must also be pushed in to change flame settings.

OVEN LIGHT

• The light bulb is loose or defective. Tighten or replace the bulb.

DOES NOT WORK

• The switch operating light is broken. Call for service.

FOOD DOES NOT

• The oven controls are improperly set. See the “How to set your oven

BAKE OR ROAST

for baking or roasting” section.

PROPERLY

• Incorrect cookware or cookware of improper size being used.

See the “How to set your oven for baking or roasting” section.

• Use a foil tent to slow down browning during roasting.

FOOD DOES NOT

• The oven control is not set at BROIL. Push in the BROIL selector

BROIL PROPERLY

button for the oven you want to use.

• Improper shelf position being used. See the Broiling Guide.

• Cookware is not suited for broiling. Use the broiling pan and grid

that came with your range.

• Aluminum foil used on the broiling pan and grid has not been fitted

properly and slit as recommended.

• In some areas the power (voltage) may be low. Preheat the broil

element for 10 minutes. Broil for the longest period of time
recommended in the Broiling Guide.

A. Yellow flames: Call for

service.

B. Yellow tips on outer cones:

Normal for LP gas.

C. Soft blue flames: Normal

for natural gas.

The Problem Solver

Stainless Steel Range