beautypg.com

Storage, Troubleshooting – Gravely 988100-GR1336FX User Manual

Page 25

background image

GB - 25

Storage – Two Months or More

Check each item in the Maintenance Schedule on page
17, b
ut do not add gasoline.

Clean the unit. Touch up all scratched painted surfaces.

IMPORTANT: Never spray unit with high-pressure
water or store unit outdoors. Store unit in a cool, dry,
protected location.

NOTE: Clean unit thoroughly with mild soap and low
pressure water and lubricate (see Maintenance). Touch
up all scratched painted surfaces. Do not allow gaso-
line or oil to remain on any decals.

Engine

Refer to the engine manual to prepare the engine for
storage.

Battery

Remove battery and store in a cool, dry place.

STORAGE

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION

Engine will not
start

1. Safety Interlock System is

preventing start.

2. Fuel tank is empty or fuel is

contaminated.

3. Air cleaner is clogged or

damaged.

4. Safety Interlock System out of

adjustment or defective.

5. Dirty or damaged spark plug.

1. The engine will not start unless the shift lever

is in neutral, the key is in the On position and
the Power Take Off (PTO) is Off (988100, 101,
102, 103, 104, 110, 112).

The engine will not start unless the key is in
the On position , and the Power Take Off
(PTO) is Off (988114, 115, 118, 119, 313) .

2. Add fuel. If necessary, replace the fuel with

clean, fresh fuel.

3. Clean or replace the filter element. See engine

manual.

4. See your Dealer for repairs.

5. See Engine Manual.

Unit will not
move or mow
when the engine
is running

1. Transmission belt or mower

belt is broken, worn, or off the
pulleys.

1. Check belts for wear, damage and correct

position on pulleys. Replace belts if worn or
damaged. See Replace Transmission Belt on
page 21.

Changes in the
sound or
vibrations of the
unit

1. Loose or missing fasteners.

2. Mower blade problem.

3. Worn or damaged clutch.

1. Check all the fasteners. Replace if necessary.

2. Check blades for wear or damage. See Mower

Blades on page 24.

3. See your Dealer for repairs.