GE 28213 Series - Manual (Page 25)

5
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During
a phone call, you will hear a beep to indicate another call is waiting on the line and Caller
ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
flash button on the handset, and your
original call is put on hold.
• To switch between the two calls, press the flash button.
Last Number Redial
You may redial a number up to 0 digits long. To quickly redial the last number you
dialed:
1. Press the TALK/SPEAKER button.
. Press the redial/format button.
-OR-
. Press the redial/format button first, then use the caller ID-volume (5 or 6)
button to select the desired redial number.
- Press the caller ID-volume (5) to review the oldest call and scroll toward the
most recent calls (higher numbers).
- Press the caller ID-volume (6) to review the newest call and scroll to older calls
(lower numbers).
NOTE: You may choose from the last three numbers that were
dialed.
. Press the TALK/SPEAKER button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the redial/format
button to quickly redial the number.
Exit
Press the END button to exit a menu function and return to the standby screen.