GIGABYTE GA-K8NE - Manual (Page 66)

GA-K8NE Motherboard - 66 -
English
Press Enter to view and verify details. The Array Detail screen appears.
The Array Detail screen shows various information about the array that you selected, such as Striping Block
used, RAID Mode, Striping Width, Disk Model Name, and disk capacity.
If you want to mark this disk as empty and wipe out all its contents, press C.
At the prompt, press Y to wipe out all the data, otherwise press N.
Press Enter again to go back to the previous screen and then press Ctrl + X to exit the RAID setup.
Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load
drivers under Windows.
Array 2 : NVIDIA MIRROR 76.33G
- Array Detail -
RAID Mode: Mirroring
Striping Width : 1
Striping Block: 64K
Adapt Channel M/S Index Disk Model Name Capacity
1 1 Master 0 Maxtor 6Y080M0 76.33GB
1 0 Master 1 Maxtor 6Y080M0 76.33GB
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return