English – GIGABYTE AMD Socket 754 Processor Motherboard GA-K8NE-RH User Manual
Page 41
BIOS Setup
- 41 -
English
Reset Case Open Status
Disabled
Don't reset case open status. (Default value)
Enabled
Clear case open status at next boot.
Case Opened
If the case is closed, "Case Opened" will show "No".
If the case have been opened, "Case Opened" will show "Yes".
If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save
CMOS, your computer will restart.
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F
Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F
Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F
Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F
Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled
Disable this function. (Default value)
CPU FAN Fail Warning
Disabled
Disable CPU fan fail warning function. (Default value)
Enabled
Enable CPU fan fail warning function.
CPU Smart FAN Control
(Note)
Disabled
Disable this function. (Default Value)
Enabled
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements.
CPU FAN Manual Control
CPU Smart Fan Control will become disabled when this item is enabled.
Enabled
Enable the CPU fan manual control function.
Disabled
Disable the CPU fan manual control function. (Default value)
CPU FAN: Low Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Low Speed option configures the speed of the CPU fan when the CPU temperature
is below the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 8)
The CPU fan runs at full speed when both CPU Smart FAN Control and CPU FAN Manual
Control are disabled.
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
For more detailed information please check at the FAQ section on GIGABYTE's website.