Grizzly G0562Z - Manual (Page 17)

Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+)
-15-
6. align each of the collector supports with the
mounting holes on the base, as shown in
figure 13, then secure them in place with (4)
5 ⁄
16
"-18 x 1 ⁄
2
" flange bolts.
7. With assistance, place one of the rubber
gaskets around the rim of the intake on one
of the collectors, then secure the collector
to the metal “y” outlet with (8)
5 ⁄
16
"-18 x 1 ⁄
2
"
flange bolts (see figure 14).
note: The collector attaches to each support
bracket. The inside of the collector is fun-
nel shaped and directs the air around in a
cyclonic motion.
8. attach the top of the canister support to the
collector with (2) 5 ⁄
16
"-18 x 1 ⁄
2
" flange screws,
as shown in figure 14.
g1030z2/g1030z2p only: place the upper
bag support over the canister support and
secure it with (2)
5 ⁄
16
"-18 x 1 ⁄
2
" flange bolts, as
shown in figure 15.
figure 13. Collector support installed.
x 4
Collector
support
figure 14. Collector installed.
Collector
Canister
support
x 2
x 8
gasket
"y" outlet
figure 16. Collectors installed (g0562z shown).
figure 15. Mounting collector to brackets.
Collector
Canister
support
9. repeat steps 7 & 8 for the other collector.
the assembly should now look similar to
figure 16.
upper Bag support