Grizzly G0562Z - Manual (Page 16)

-14-
Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+)
to assemble your dust collector:
1. place the base upside down on a clean, flat
surface (to avoid scratching the paint).
2. attach the casters to the base with (16) 5 ⁄
16
"-
18 x 1 ⁄
2
" flange bolts, as shown in figure 9.
4. place a rubber gasket around the impeller
outlet rim, as shown in figure 11.
figure 11. positioning impeller outlet gasket.
gasket
5. secure the metal "y" outlet to the impeller
outlet with (8) 5 ⁄
16
"-18 x 1 ⁄
2
" flange bolts, as
shown in figure 12.
figure 12. outlet connector installed.
x 8
"y" outlet
3. turn the base over, align the motor and
impeller assembly with the mounting holes,
then secure the assembly with (4)
5 ⁄
16
"-18 x
1 ⁄
2
" flange bolts, as shown in figure 10.
figure 9. Caster installed onto the base.
x 16
Motor and Impeller Assembly
Base Plate
figure 10. Motor and impeller assembly installed
onto the base.
x 4
assembly