beautypg.com

Operating the self-cleaning oven – GE 164D2966P079 User Manual

Page 19

background image

19

Operating the Self-Cleaning Oven

After a Clean Cycle

The clean light will go off.

Turn the Oven Temperature knob to OFF. Slide the
latch handle to the left.

Never force the latch handle. Wait until the
latch slides easily. Forcing the latch handle may
damage the door lock.

You may notice some white ash in the oven. Just
wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-
filled steel wool pad. Be sure to rinse thoroughly with
a vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed by the
Clean Cycle.

If the oven is not clean after one Clean Cycle,
repeat the cycle.

If the shelves have become hard to slide, wipe the
shelf supports with cooking oil.

To Stop a Clean Cycle

1. Turn the Oven Temperature knob to OFF.

2. Wait until the oven has cooled below the locking temperature.

3. Slide the latch to the left to unlock the oven door.

Questions and Answers

Q. Can I use commercial oven cleaners on any part

of my self-cleaning oven?

A. No cleaners or coatings should be used around any

part of this oven. If you do use them and do not
thoroughly rinse the oven with water, wiping it
absolutely clean afterwards, the residue can scar
the oven surface and damage metal parts the next
time the oven is automatically cleaned.

Q. What should I do if excessive smoking occurs

during cleaning?

A. This is caused by excessive soil. Turn the Oven

Temperature knob to OFF. Open windows to rid
room of smoke. Wipe up the excess soil and reset
the clean cycle.

Q. Is the “crackling” or “popping” sound I hear

during cleaning normal?

A. Yes. This is the sound of the metal heating

and cooling during both the cooking and
cleaning functions.

Q. Should there be any odor during the cleaning?

A. Yes, there may be an odor during the first few

cleanings. Failure to wipe out excessive soil might
also cause a strong odor when cleaning.

Q. What causes the hair-like lines on the enameled

surface of my oven?

A. This is a normal condition, resulting from heating

and cooling during cleaning. These lines do not
affect how your oven performs.

Q. Why do I have ash left in my oven after

cleaning?

A. Some types of soil will leave a deposit which is

ash. It can be removed with a damp sponge
or cloth.

Q. My oven shelves do not slide easily. What is

the matter?

A. After many cleanings, oven shelves will lose their

luster and become hard to slide. To make shelves
slide more easily, wipe the shelf supports with
cooking oil.

Q. My oven shelves have become gray after the

self-clean cycle. Is this normal?

A. Yes. After the self-clean cycle, the shelves will

lose some luster and change to a deep gray color.

Q. Can I cook food on the cooktop while the oven

is self-cleaning?

A. Yes. While the oven is self-cleaning, you can use

the cooktop just as you normally do.