English, 2 advanced bios features, First / second / third boot device – GIGABYTE GA-8I845GE775-G User Manual

Page 32: Boot up floppy seek

GA-8I845GE775-G Motherboard

- 32 -

English

2-2

Advanced BIOS Features

"#" This option is available only when the processor you install supports Intel

Hyper-

Threading Technology.

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

HDD-0~3

Select your boot device priority by Hard Disk.

SCSI

Select your boot device priority by SCSI.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM

Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

LAN

Select your boot device priority by LAN.

Disabled

Select your boot device priority by Disabled.

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K
type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Disabled

BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)

Enabled

BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80
tracks

Advanced BIOS Features

` First Boot Device

[Floppy]

Second Boot Device

[HDD-0]

Third Boot Device

[CDROM]

Boot Up Floppy Seek

[Disabled]

Password Check

[Setup]

CPU Hyper-Threading

[Enabled]

Limit CPUID Max. to 3

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

Init Display First

[Onboard/AGP]

Graphics Aperture Size

[128MB]

Graphics Share Memory

[8MB]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level `

Select Boot Device
Priority

[Floppy]
Boot from floppy

[LS120]
Boot from LS120

[HDD-0]
Boot from First HDD

[HDD-1]
Boot from second HDD

(Note) This item will show up when you install a processor that supports this function.