GIGABYTE GeForceTM FX 5700 Graphics Accelerator GV-N57256V - Manual (Page 31)

Software Installation - 31 -
English
3.2. Win ® 98/98SE / Win ® 2000 / Win ® ME driver installation
Please make sure the Windows have installed Windows Service Pack version 2 (or later)
before installing the graphics accelerator driver.
With Windows running on your computer, you need to install the graphics card driver to
take advantage of the higher performance, resolutions, and special graphics features of
the graphics card. To ensure you install the latest driver, insert the Installation CD that
shipped with your graphics card.
To install the graphics card driver for Win ® 98/98SE / Win ® 2000 / Win ® ME, please insert
the Installation CD. Then the AUTORUN window will show up. Click Install Display Driver
item, and follow the wizard to install the driver.
If Windows ® does not show the CD automatically, please run following steps:
1. Click the Start button on the control bar.
2. Select Run.
3. Type the following: D:\SETUP.exe
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
4. Click "OK".
5. Click on "Install Display Drivers" to begin the Installation Wizard.
6. Click "Next".
7. Click "Yes" to the license agreement.
8. Follow the Wizard's on-screen instructions to complete the installation.
3.3. BIOS flash utility
BIOS update procedure:
MNote: Please download the newest BIOS from our website (www.gigabyte.com.tw)
or contact your local dealer for the file.
MIf you want to realize the BIOS flash information, please refer to detail on subsection
5.1. "How to reflash the BIOS".