Risk to injury (cont.) – Global Machinery Company ATI2K User Manual
Page 7
7
Risk to injury (cont.)
•
Loss of control of the tool can lead to injury to self or
others.
•
Never operate tool while under the influence of drugs
or alcohol.
•
Don’t overreach. Keep proper footing and balance at all
times.
•
Keep handles dry, clean, and free from oil and grease.
•
Stay alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
•
Poor quality, improper, or damaged tools such as
grinding wheels, chisels, sockets, drills, nailers, staplers,
etc., can fly apart during operation, propelling particles
throughout the work area causing serious injury.
•
Always use tool attachments rated for the speed of the
air tool.
•
Never use air tools which have been dropped, impacted
or damaged by use.
•
Use only impact grade sockets on an impact wrench.
•
Do not apply excessive force to the tool, let the tool
perform the work.
•
Fasteners could ricochet or be propelled causing serious
injury or property damage.
•
Never point discharge of tool at self or others.
•
Do not pull trigger unless tool contact safety device is
against work surface.
•
Never attempt to drive fasteners into hard surfaces such
as steel, concrete, or tile.
•
Take care to avoid driving a fastener on top of another
fastener.
•
Position tool carefully so that fasteners will be delivered
to the proper location.
•
Improperly maintained tools and accessories can cause
serious injury.
•
Maintain the tool with care.
•
Keep a cutting tool sharp and clean. A properly
maintained tool, with sharp cutting edges reduces the
risk of binding and is easier to control.
•
There is a risk of bursting if the tool is damaged.
•
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that affects
the tool’s operation. If damaged, have the tool serviced
before using.
•
Use only accessories identified by the manufacturer to
be used with specific tools.
•
Use of an accessory not intended for use with the
specific tools, increases the risk of injury to persons.