GIGABYTE Xeon Processor Motherboard GA-5YXS-RH User Manual
Page 36
3 6
GA-5YXS1-RH/GA-5YXS-RH Motherboard
Base I/O Address/IRQ
3F8/IRQ4
Set IO address to 3F8/IRQ4.
2F8/IRQ3
Set IO address to 2F8/IRQ3. (Default setting)
3E8/IRQ4
Set IO address to 3E8/IRQ4.
2E8/IRQ3
Set IO address to 2E8/IRQ3.
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
Enabled
Enable USB controller. (Default setting)
Disabled
Disbale this function.
Legacy USB Support
This option allows user to function support for legacy USB.
Enabled
Enables support for legacy USB. (Default setting)
Disabled
Disables support for legacy USB.
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI
Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
LPC
Set Route Port 80h I/O cycles to the LPC bus.
Serial ATA
Enabled
Enables on-board serial ATA function. (Default setting)
Disabled
Disables on-board serial ATA function.
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Auto detected. (Default setting)
Serial ATA
Set Native mode to Serial ATA.
SATA RAID Enable
Enabled
Set this item to enable and configure SATA RAID function.
Disabled
Disabled this function. (Default setting)
SATA AHCI Enable
Enabled
Set this item to enable SATA AHCI function for WinXP-SP1+IAA