GIGABYTE Xeon Processor Motherboard GA-5YXS-RH - Manual (Page 20)

2 0
English
GA-5YXS1-RH/GA-5YXS-RH Motherboard
15/ 16/ 17 ) FAN1 (CPU fan / System fan cable connectors)
The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_FAN) power
connector and possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is
the ground wire (GND).
Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to pre-
vent CPU damage or system hanging caused by overheating.
1
FAN2
1
Pin No. Definition
1 GND
2 12V
3 Sense
4 Control
FAN1
FAN3
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
18 ) BAT1 (Battery)
CAUTION
™ Danger of explosion if battery is incorrectly
replaced.
™ Replace only with the same or equivalent
type recommended by the manufacturer.
™ Dispose of used batteries according to the
manufacturer’s instructions.