General Tire 15-220 - Manual (Page 2)

THANK YOU
for choosing this General® International model 15-220 oscillating
spindle sander. This machine has been carefully tested and inspected before shipment and if
properly used and maintained, will provide you with years of reliable service. To ensure
optimum performance and trouble-free operation, and to get the most from your investment,
please take the time to read this manual before assembling, installing and operating the unit.
The manual’s purpose is to familiarize you with the safe operation, basic function, and features
of this oscillating spindle sander as well as the set-up, maintenance and identification of its
parts and components. This manual is not intended as a substitute for formal woodworking
instruction, nor to offer the user instruction in the craft of woodworking. If you are not sure about
the safety of performing a certain operation or procedure, do not proceed until you can
confirm, from knowledgeable and qualified sources, that it is safe to do so.
Once you’ve read through these instructions, keep this manual handy for future reference.
All component parts of General® International machinery are carefully tested and inspected during all stages of
production, and each machine is thoroughly inspected upon completion of assembly. Because of our commit-
ment to quality and customer satisfaction, General® International agrees to repair or replace, within a period of 24
months from date of purchase, any genuine part or parts which, upon examination, prove to be defective in work-
manship or material. In order to obtain this warranty, all defective parts must be returned freight pre-paid to
General® International Mfg. Co., Ltd. Repairs attempted without our written authorization will void this warranty.
GENERAL ® INTERNATIONAL WARRANTY
Disclaimer: The information and specifications in this manual pertain to
the unit as it was supplied from the factory at the time of printing.
Because we are committed to making constant improvements,
General® International reserves the right to make changes to compo-
nents, parts or features of this unit as deemed necessary, without prior
notice and without obligation to install any such changes on previously
delivered units. Reasonable care is taken at the factory to ensure that
the specifications and information in this manual corresponds with that
of the unit with which it was supplied. However, special orders and “after
factory” modifications may render some or all information in this
manual inapplicable to your machine. Further, as several generations of
this oscillating spindle sander and several versions of this manual may
be in circulation, if you own an earlier or later version of this unit, this
manual may not depict your machine exactly. If you have any doubts
or questions contact your retailer or our support line with the model and
serial number of your unit for clarification.
GENERAL® INTERNATIONAL
8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3
Telephone (514) 326-1161 • Fax (514) 326-5555
www.general.ca