beautypg.com

Self-cleaning oven, How to set the oven for self-cleaning, After a clean cycle – GE Monogram 164D4290P031 User Manual

Page 20

background image

Self-Cleaning Oven

Stainless Steel Range

20

How to set
the oven for
self-cleaning

The clean cycle takes about 5 hours plus about
30 minutes to cool down.

1

Push in the CLEAN selector button.

2

Set the thermostat dial to CLEAN.

• Cooling blower turns on.

• The OVEN ON light and HEATING light

turn on.

• The DOOR LOCKED light turns on.

3

When cleaning has finished, push the OFF
selector button.

The blower and the OVEN ON light will turn
off once the cycle has finished.

The door latch will open automatically after the
oven temperature falls below 550°F.

Thermostat dial

After a
clean cycle

If white spots remain,

remove them with warm

sudsy water and rinse thoroughly with a vinegar
and water mixture. These deposits are usually a
salt residue that cannot be removed by the
clean cycle.

If the oven is not clean after one clean cycle,
repeat the cycle.

You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.