GE RM24941 - Manual (Page 19)

NAVIGATION KEYS & OK KEY
Use the LCD NAVIGATION keys (UP, DOWN, LEFT, and RIGHT ARROW keys) to move through the on-
screen menu and guides. The NAVIGATION keys may also be used to move through the highlighted choic-
es. The LCD OK key chooses the highlighted choice.
Note: With some manufactured models, the LCD MENU or ENTER key should be used to select the
highlighted choices.
PIP & SWAP
The LCD Picture-in-Picture (PIP) and SWAP keys operate your TV’s Picture-in-Picture features.
PREVIOUS CHANNEL (PREV CH)
The PREV CH key on the rubber keypad lets you access the previous channel you selected. It operates
the same way as the LAST CHANNEL or RECALL keys do on many remotes.
PUNCH-THROUGH
A Punch-through command has the ability to punch-through from one device to another, (e.g., the TV
volume can work while the remote is in the VCR Mode).
SETUP KEY
The SETUP key on the rubber keypad is used to walk you through the steps in setting up the remote.
Setup is used for Library Code Entry, Code Search, Code Identification and other functions. During a
Setup function, if no button is pressed for 60 seconds, the unit automatically exits from the Setup rou-
tine.
SLEEP KEY
The LCD SLEEP key allows you to turn your TV off automatically at a predetermined time.
SLEEP TIMER
The Sleep Timer allows you to program your TV to turn off after a period of time (from one to 99 min-
utes). The LCD SLEEP key is used to set the Sleep Timer and is only available in the main TV Mode.
TRANSPORT KEYS
The transport keys are located on the rubber keypad. Transport keys include the REVERSE, PLAY, FOR-
WARD
, RECORD, STOP and PAUSE keys.
TV/VCR
The LCD TV/VCR key operates the TV/VCR function of your VCR.
VOLUME AND CHANNEL KEYS
The VOLUME and CHANNEL keys (VOL+, VOL-, CH+, and CH- keys) on the rubber keypad increase
and decrease the volume level and channel numbers.
Note: With some brands, these keys also navigate
through highlighted choices in Menu Mode.
17
24941manual 8/13/03 8/19/03 8:42 AM Page 19