English integrated peripherals, Ide1 conductor cable, Ide2 conductor cable – GIGABYTE 8S648FXP-RZ-C User Manual
Page 25: On-chip primary pci ide, On-chip secondary pci ide, Ac97 audio, Onboard lan device
![background image](/manuals/112157/25/background.png)
- 25 -
BIOS Setup
English
Integrated Peripherals
IDE1 Conductor Cable
Auto
Will be automatically detected by BIOS. (Default value)
ATA66/100/133
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
ATA33
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default value)
ATA66/100/133
Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
ATA33
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
AC97 Audio
Enabled
Enable onboard AC'97 audio function. (Default value)
Disabled
Disable this function.
Onboard LAN device *
Disabled
Disable this function.
Enabled
Enable Onboard Lan Chip device. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE1 Conductor Cable
[Auto]
IDE2 Conductor Cable
[Auto]
On-Chip Primary PCI IDE
[Enabled]
On-Chip Secondary PCI IDE
[Enabled]
AC97 Audio
[Enabled]
Onboard LAN device *
[Enabled]
USB Controller
[Enabled]
USB Legacy Support
[Disabled]
SiS Serial ATA Controller
[Enabled]
SiS Serial ATA Mode
[RAID]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[ECP]
ECP Mode Use DMA
[3]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Item Help
Menu Level`
[Auto]
Auto-detect IDE
cable type
[ATA66/100/133]
Set Conductor cable
to ATA66/100/133(80
Pins)
[ATA33]
Set Conductor cable
to ATA33(40-Pins)
"*" Only for 8S648FXP-RZ.