GE A1250 - Manual (Page 74)

70
3. For manual adjustment, use the Left/Right buttons
to adjust the brightness.
Power Saver
This setting allows you to save power and get the
maximum possible running time for your battery. Follow
the steps below to turn off the LCD screen and camera
automatically after a period of inactivity.
1. Select the
Power Save setting from the Setup menu
as described previously.
2. Use the Up/Down navigation buttons to switch
between LCD power and Camera power fields.
3. Use the Left/Right navigation buttons to specify
the idle period before automatic power-off. The level
bars correspond to the following idle periods.
• LCD off:
30 seconds, 1 minute, 2 minutes, and Always on.
• Camera off:
3 minutes, 5 minutes, 10 minutes, and Always on.
4. Press the button to confirm.