Grizzly G0613/G0614 - Manual (Page 17)

G0613/14 Swivel Mast Metal Cutting Bandsaw
-15-
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
Inventory
After all the parts have been removed from the
crate, you should have the following accessories:
Shipping Crate: (Figure 6) Qty
A. Splash tray (only for G0614) ..................... 1
B. Handle ........................................................ 1
C. Work Stop Arm ........................................... 1
D. Work Stop Lock Lever ................................ 1
E. Work Stop Rod ........................................... 1
F. Hardware .................................................... 1
—Carriage Screw 5/16-18 X16 .................. 8
—Hex Nut 5/16-18 ..................................... 8
—Flat Washer 10mm ................................. 4
—Hex Bolt M10-1.5 X 25 ........................... 4
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 6. G0613/14 inventory.
A
B
C
D
F
E