GE Spacemaker WSM2400L User Manual
Page 23

PROBLEM
POSSIBLE CAUSE AND REMEDY
. Leaving clothes dryer after tumbling stops.
after dryer stops
PERMANENT PRESS
tumbling, remove
and place
on hangers.
AND “NO-IRON”
ITEMS
many items in dryer. Dry only one
load at a time. Do
combine loads.
. Too few items in dryer. If drying only one article, add two or more
articles,
even if dry, to insure proper tumbling.
Improper loads. Avoid laundering heavy
items, such as work
clothes, with lighter permanent press items such as shirts or blouses. Also do not wash
or dry permanent press items with regular laundry.
Too many items in washer. Items must have
to move freely. Permanent press
loads
always be
than regular loads..
more than
●
Use of incorrect wash and dry cycles, Use permanent press wash
provides a cool-down rinse to
use automatic dry
●
Incorrect water level. Use large level for medium
medium
for
●
or
water
with plenty of
detergent.
. Accumulation of lime
due to use of carbonate detergents. If a non-phosphate
detergent must be used, avoid the use of a
detergent.
Failure to use
softener. Proper use of fabric softener will
To remove
●
on automatic dry setting with small load.
.
and dry on automatic dry setting.
. If unsuccessful,
on high heat for
and hang immediately.
●
Iron carefully,
. Send cleaners far pressing.
●
Some
may remain which cannot be removed?
If you
good laundry
and permanent press
come
the
may
be good quality. Also, in permanent
press
blends,
-on portion
can eventually wear away leaving
synthetic. Since
resin
imparts
memory, a loss or decrease of permanent
performance will result.
23