Grandstream Networks 200 Series User Manual

Page 28

Cloned WAN MAC Addr

Allow the user to set a specific MAC address. Set in Hex format.

LAN Subnet Mask

Sets the LAN subnet mask. Default value is 255.255.255.0

LAN DHCP Base IP

Base IP for the LAN port, which function as a Gateway for the subnet.
Default value is 192.168.2.1.

DHCP IP Lease Time

Value is set in units of hours. Default value is 120hr (5 Days.) The
time IP address is assigned to the LAN clients.

DMZ IP

Forward all WAN IP traffic to a specific IP address if no matching port
is used by HandyTone-486 itself or in the defined port forwarding.

Port Forwarding

Allow the user to forward a matching (TCP/UDP) port to a specific
LAN IP address with a specific (TCP/UDP) port.

In addition to the Basic Settings configuration page, end user also has access to the
device Status page. The following is a screen shot of the device Status page. Details are
explained next.

Grandstream Device Configuration

STATUS BASIC SETTINGS

ADVANCED SETTINGS

ACCOUNT

MAC Address: 00.0B.82.08.3D.6E

IP Address: 192.168.1.113

Product Model: BT200

Software Version: Program-- 1.1.0.11 Bootloader-- 1.1.0.1

System Up Time: 0 day(s) 7 hour(s) 7 minute(s)

Registered: Account : Yes

PPPoE Link Up: disabled

detected NAT type is full cone