Graco 65 - Manual (Page 18)

18
FORWARD-FACING INSTALLATION WITH LATCH
Adjust child restraint to Upright position
(fig. a). Flip recline feet out for
forward facing use.
-AKE
LATCH belt is
stored. (see fig. b, pg. 37)
Place forward-facing ON
EQUIPPED LATCH anchors.
For ease of installation, extend LATCH
belt to its maximum length.
(OOK
3LIDE
1
2
3
4
5
Press down firmly in center of child restraint to
COMPRESS
LATCH belt by pulling adjustment belt (fig. d).
0ULL
TO
#HECK
and does not slip from the tightened position.
If it does not stay tight, try another seating
POSITION
6
7
!TTACH
hardware (B) and tighten adjustment belt to
REMOVE
Belt must lay flat and not be twisted.
0ERIODICALLY
SECURELY
8
4O LATCH LATCH from
6EHICLE