Cleaning, Automatic clean function – GE 169164 User Manual

Page 11

Client:

PIL (Wal*Mart)

Project:

169164

Language: EN

Date:

06.03.2008

Version:

Page:

(of 14 pages)

Barcode: 690 5039 10 000 7 00243

CLEANING

Automatic clean function

The coffee maker is equipped with an automatic clean function. After 60 brewing cycles,
the

clean indicator/button (22) lights up. This indicates coffee maker should be cleaned

by using the automatic clean function and the charcoal filter

(17) should be replaced.

NOTE: The coffee maker can continue to be used, when clean indicator/button (22) is
on.
•

To begin the cleaning cycle, remove the charcoal filter

(17) from the water tank

(10). Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a
descaling product. Press

clean (22) button for three seconds. The clean indicator/

button

(22) flashes and the cleaning process begins.

Cleaning process:
•

24 cycles of 7 seconds brewing and 21 seconds off

•

30 minutes rest

•

Brewing the remaining descaling solution

•

After cleaning process is complete the

clean indicator/button (22) goes off. Fill water

tank

(10) with clean water and run one brewing cycle to rinse the coffee maker.

•

Change the charcoal filter

(17) (ill. k ). Reinsert the charcoal filter to the coffee

maker (ill. l ).

NOTE: You can use the cleaning function before reaching 60 cycles (especially if the water
hardness is above normal). Press and hold

clean indicator/button (22) for 3 seconds.

NOTE: The Cleaning Process takes 60 minutes to complete. You cannot cancel the
cleaning process before it is complete. Unplugging the machine only delays the cleaning
process.