Grandstream Networks Grandstream BudgeTone 200 - Manual (Page 24)

24
Menu Item Menu Functions
10
Display “[10] Phy Addr”
Press MENU to display the physical / MAC address
Press ‘↓’ or ’↑’ to exit
11
Display “[11] ring 0”
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the
stored ring tones. Now only 3 are available, ring 0 (default), ring 1 and ring
2. ring 3 is unavailable or unsupported.
Press MENU to select and exit
Display “ -- rESEt --”, please be very CAREFUL here
• Key in the physical / MAC address on back of the phone, Press
MENU, phone will be reset to FACTORY DEFAULT setting, and
all your setting will be erased.
• Press MENU key without key in anything, phone will function the
same as power cycle or reboot
Others
When phone is powered on and time is displayed
• Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear
and adjust the ring tone volume, from 0 (off) to 7 (maximum), off
and on hook to set
• Press “SPEAKERPHONE” button, or off hook and pick up
handset, press ‘↓’ or ’↑’ to adjust the speakerphone/headset or
handset volume