GPX HT119B - Manual (Page 9)

9
Component Video output
Coaxial audio output
When connecting two products using an Component Cable, match the colored ports
with the same colored connection. (Green to Green, Red to Red, and Blue to Blue)
Step 1:
Connect a Component Cable (not included) to the Component Video
Outputs on the unit and the component video inputs on the Television
Step 2:
Connect the RCa Cable to the Audio Outputs on the unit to the audio/
video inputs on the Television.
Step 3:
Turn the unit on by pressing the Power Button.
Step 4:
Change the Video Output setting on the unit to YUV P-Scan.
Step 5:
Change the television to the correct video input setting.
Step 6:
Video played through the unit will now be seen on the connected
television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1:
Connect an RCA Cable (included) to the Coaxial Audio Output on the
unit and the coaxial audio input on a surround sound system.
Step 2:
Turn the unit on by pressing the Power Button.
Step 3:
Change the stereo system to the correct audio input setting.
Step 4:
audio played through the unit will now be heard on the connected
television or stereo system.
HT119B-IB.indd 9 12/17/2008 3:21:09 PM