GPX HT119B - Manual (Page 8)

8
s-Video output
Composite Video output
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1:
Connect the RCa Cable to the Audio Outputs and Composite Video
Output on the unit to the audio/video inputs on the Television
Step 2:
Turn the unit on by pressing the Power Button.
Step 3:
Change the television to the correct audio/video input setting.
Step 4:
Change the Video Output setting on the unit to YUV.
Step 5:
audio and video played through the unit will now be seen and heard on
the connected television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
When connecting two products using an RCA Cable, match the colored ports with the
same colored connection. (Red to Red, White to White, and Yellow to Yellow)
Step 1:
Connect an S-Video Cable (not included) to the S-Video Output on the
unit and the s-Video Input on the Television.
Step 2:
Connect the RCa Cable to the Audio Outputs on the unit to the audio/
video inputs on the Television.
Step 3:
Turn the unit on by pressing the Power Button.
Step 4:
Change the Video Output setting on the unit to s-Video.
Step 5:
Change the television to the correct audio/video input setting.
Step 6:
Video played through the unit will now be seen on the Television.
• Press the Video button on the remote control to cycle through S-Video,
YUV, and P-Scan.
HT119B-IB.indd 8 12/17/2008 3:21:09 PM