GE 24958 - Manual (Page 7)

7
Direct Code Entry
Direct Code Entry
NOTE:.You.can.store.any.kind.of.code.under.any.
mode.(except.TV)..I.E..you.can.store.a.VCR.code.
under.the. CBL button,.or.a.DVD.code.under.the.
AUX button,.etc..However,.you.can.only.store.TV.
codes.under.the. TV button.
1....Press.and.hold.the. SETUP button.until.the.red.
indicator.stays.on,.then.release.the SETUP
button.
2....Press.and.release.the.desired.mode.button.
( TV, DVD,.etc.)..The.red.indicator.blinks,.then.
stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.
separate.sheet)..Note:.after.a.valid.code.entry,.
the.red.indicator.turns.off...For.an.invalid.code,.
the.red.indicator.flashes.
4.. With.your.device.on,.press CHANNEL UP (or
POWER)..If.the.device.responds,.no.further.
programming.is.required..Note:.If.some.buttons.
do.not.operate.your.equipment,.try.one.of.the.
other.codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.
later.
Type Type stored Code
TV TV
DVD
DVR
CBL
AMP
AUX