beautypg.com

Programming combo device codes, Dvd/dvr punch-through feature, Volume/mute control and punch- through feature – GE 24958 User Manual

Page 10: Setup

background image

10

Programming Combo Device Codes

Some.combo.(combination).devices.(TV/DVR,.TV/

DVD,.DVD/DVR,.etc.).require.you.to.set.up.2.dif-

ferent.modes.to.control.both.parts.of.the.combo..

For.example,.if.you.have.a.TV/DVD.combo,.you.

might.need.to.set.up.one.code.under.the.

TV mode.

to.control.the.TV.and.a.separate.code.(under.other.

modes).to.control.the.DVD..

DVD/DVR Punch-Through Feature

This.remote.allows.the.6.DVD/VCR.transport.

buttons.(i.e..PLAY,.PAUSE,.STOP,.FF,.REWIND,.

and.REC).to.Punch-through.from.any.Mode.

programmed.with.TV,.SAT.or.Cable.codes.to.the.

last.DVD,.or.VCR.programmed.Mode.you.used,.

i.e.,.the.transport.keys.control.your.DVD.or.VCR.

player.even.when.you.are.in.TV,.SAT.or.Cable.

mode..If.you.use.a.SAT/DVR,.Cable/DVR,.etc.,.you.

may.want.to.disable.this.Punch-through.feature.

to.allow.the.transport.keys.to.control.your.DVR.

device..The.following.steps.will.disable.the.punch-

through.feature:.

1.. Press.and.hold.

SETUP until.the.red.indicator.

stays.on,.then.release.the.

SETUP button..

2.. Press.and.hold.

PAUSE until.the.red.indicator.

turns.off,.then.release.the.

PAUSE button..The.

PAUSE button.needs.held.for.about.3.seconds.

before.the.red.indicator.turns.off..

The.punch-through.feature.can.be.enabled.again.

by.repeating.the.above.steps.

Volume/Mute Control and Punch-

Through Feature

Your.remote.allows.you.to.select.which.device.

mode.controls.

VOLUME.and.MUTE..This.remote.

is.initially.set.for.all.device.modes.to.use.their.own.

Volume/Mute.control.if.present..

If.the.programmed.code.does.not.have.Volume/

Mute.operation,.then.

VOLUME.and.MUTE will.

“punch-through”.(hand-over).control.to.the.

TV-

mode.device.without.you.needing.to.change.to

TV.

mode..

Note: Any.mode.chosen.for.Volume/Mute.

control.

must have.its.own.Volume/Mute.function.or.

else.

VOLUME and.MUTE will.not.function.

Setup

This manual is related to the following products: