GIGABYTE GA-K8VT800 - Manual (Page 74)

GA-K8VT800 Motherboard - 74 -
English
SPDIF Output Device (Optional Device)
A "SPDIF_IO" connector is available on the
motherboard. The SPDIF cable with rear bracket
could link to the "SPDIF_IO" connector (as picture).
For the further linkage to decoder, the rear bracket
provides coaxial cable and Fiber connecting port
(Note1) .
1. Install the SPDIF output device to the rear
bracket of PC, and fix it with screw.
2. Connect SPDIF device to the motherboard.
3. Connect SPDIF to the SPDIF decoder.
(Note1) If you want to use both of the 8 channel audio function and SPDIF out function, you may buy
the Audio Combo Kit (refer to the 8 channel Audio Setup section).