GIGABYTE GA-K8VT800 - Manual (Page 67)

Appendix - 67 -
English
B.Delete a RAID array (Delete Array)¡G
¡G ¡G ¡G ¡G
To delete a RAID array, select Delete Array and press . After confirming the RAID array to be
deleted, press and the The selected array will be destoried. Are you sure? Continue? Press
Y/N message will appear. Press to confirm or to cancel.
Except for RAID 1 array, all the data on the disk array will be destroyed after a disk array is deleted.
When RAID 1 array is deleted, the data on the two RAID disks will be reserved and the two hard disks
will become normal disk drives.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Delete a RAID array contain
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC
: Exit
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Channel Drive Name Array Name Mode Size(GB) Status
[*]Serial_Ch0 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe0
[*]Serial_Ch1 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe1
The selected array will be destoried.
Are you sure? Continue? Press Y/N
Figure 7