Global Machinery Company ATBR1650K - Manual (Page 3)

3
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response. Phone
1300 880 001 in Australia or 0800 445 721 in New Zealand.
Introduction
Your new GMC tool will more than satisfy your expectations.
It has been manufactured under stringent GMC Quality
Standards to meet superior performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Tool. Take special care
to heed the Cautions and Warnings.
Your GMC tool has many features that will make your job
faster and easier. Safety, performance, and dependability
have been given top priority in the development of this
tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Specifications
Operating Pressure: 75 – 120 PSI
Air Consumption: 4 – 8CFM
Magazine Capacity: 100 Nails
Nail size: 16 Gauge C-Brads
Nail lengths: 18, 25, 32, 36, 45 or 50mm
Weight: 1.7kg
Air Inlet: 1⁄4” PT
Tool Dimensions: 304 x 77 x 254mm
General safety instructions for air tools
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with
this Manual and must be informed about its potential hazards.
Children and infirm people must not use this tool. Children
should be supervised at all times if they are in the area in which
the tool is being used. It is also imperative that you observe the
accident prevention regulations in force in your area. The same
applies for general rules of occupational health and safety.
Warning. When using air tools, basic safety precautions
should always be taken to reduce the risk of fire, electric
shock and personal injury. Also, please read and heed
the advice given in the additional important safety
instructions.