GE WPRB9220 - Manual (Page 6)

Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
6
Quick Start Guide for Model WPRB9250.
You can locate your model number on the bottom right of the washer cabinet.
Add detergent.
Add diluted fabric softener (on models
with a fabric softener dispenser).
Loosely load clothes no higher than the
top row of holes in the washer basket. The
water level should just cover the clothes.
Select one of the three wash methods:
■ Press WASH CYCLES to wash according
to load type
■ Press GARMENT CYCLES to wash
according to clothing type
■ Press STAIN CYCLES to wash clothes
with specific types of stains
The STAIN CYCLES will provide you with
tips on pretreating your stain and will then
automatically select the washer settings for
the optimum cycle to remove the stain.
Select the wash, garment or stain cycle by
pressing the arrow pads (
) at the
sides of the display. You can scroll up and
down through the list of cycles by pressing
the UP (
) and DOWN ( ) arrow pads
beneath the display.
NOTE: Any time you make a selection that is
incompatible with the chosen wash cycle, the
washer will beep twice.
Change any of the automatic settings,
if desired, by pressing the pad beneath
the setting.
Higher settings will:
■ Fill the washer basket with more water
■ Remove heavier soil. The highest level
is the Stain Wash cycle, with a 30 minute
soak and agitation at the beginning of
the wash cycle.
■ Add cold, warm or hot water
■ Spin faster to remove more water for
shorter drying times
Close the lid and press START.