GE 21006 User Manual
Page 26
26
To Change:
Use the same procedure to change a stored number as you do to store a
number and just replace one stored phone number with a different one.
To Delete:
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the cid/vol (up or down arrow) button to scroll to the record you
want to delete.
4. Press the DEL soft key to mark the record for deletion. The display shows
DELETE?
5. Press the OK soft key to delete the record. DELETED shows in the display.
NOTE:
If you don’t want to change or delete a number, simply press the
EXIT soft key, or wait for one minute to exit the review mode automatically.
D
IALING
A
N
UMBER
FROM
M
EMORY
1. Make sure the phone is (in TALK mode) ON by pressing the talk/callback
button.
2. Press the DIR soft key to display the stored information.
3. Use the touch tone pad to enter the memory location number. The
number dials automatically.
-OR-
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the number key (01-50) for the memory location of the phone
number you want to dial, or use the cid/vol (up or down arrow) button
to scroll to the number you want to dial.
4. Press the talk/callback button. The number dials automatically.