Grundig Xentia MFS 72-4610/8 TOP - Manual (Page 19)

ENGLISH
19
Selecting the Euro-AV (Scart) output
You can select which signal should be output at the Euro-AV sockets
AV 2 and AV 3.
You have the following options:
– The channel, which you are currently viewing
(TV → AV2 and AV3).
– The channel which has been selected last
(TUNER1 → AV2 and AV3).
– The signal of the devices, which are connected to the AV inputs
(AV1, AV2, AV3, AV3-S, AV4, AV4-S → AV2 and AV3).
1 Select »Scart Source« with » P+ « or » P- «.
2 Press »
Ǹ
« or »
Ƿ
« to select the option.
3 Press » i « to finish the setting.
TV Guide
TV Guide provides you with information about the current and the
next broadcast.
Who offers TV Guide?
Certain stations – Kabel 1, for example – offer this service for
almost all TV programs.
How TV Guide works
The station information is »loaded« once you have selected the pre-
set for the programme provider.
Transferring all information to the television is somewhat time-con-
suming, but you can call up the most current information in just a
few minutes.
Notes:
Operation with a satellite receiver is not possible with TV Guide.
If you change the station position during the time the device uses for
data transfer, it is possible that not all information will be loaded.
TV Guide settings
1 Call up the »MAIN MENU« by pressing » i «.
2 Select the line »Settings« and confirm by pressing » OK «.
3 Select the line »TV Guide« by pressing » P+ « or » P- « and con-
firm by pressing » OK «.
Note:
Additional operations are explained in the following sections.
CONVENIENCE FUNCTIONS
______________
Settings
Language
TV Guide
Timer
Scart Source TV –> AV2 & AV3
Degauss Off
Calculator
Game
● F Back
Select
● i Exit
Settings
Language
TV Guide
Timer
Scart Source
TV –> AV2 & AV3
Degauss Off
Calculator
Game
● F Back
Select
● i Exit