Settings, 10 picture settings – Grundig Xentia MFS 72-4610/8 TOP User Manual
Page 10
10
Picture settings
1
Press »
i
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »Picture« with »
P+
« or »
P-
« and confirm with »
OK
«.
– The »Picture« menu appears.
Note:
Further operation is explained in the following sections.
Picture settings
1
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with
»
P+
« or »
P-
« and adjust them with »
Ǹ
« or »
Ƿ
«.
Note:
After a short while the »Picture« menu reappears.
The settings are saved as the »User« picture default setting.
Setting the picture features
You can set the noise suppression of the picture.
You can set the noise suppression to one of four settings: »Low«,
»Medium«, »High« and »Off«.
1
Select »Noise Reduction« with »
P+
« or »
P-
« and set the desi-
red value with »
Ǹ
« or »
Ƿ
«.
Reference Plus
The Reference Plus technology combines high resolution and natural
movements. Intelligent signal processing is used to prevent distor-
tions.
1
Select »Reference Plus« with »
P+
« or »
P-
« and select the
desired setting with »
Ǹ
« or »
Ƿ
«.
Note:
By pressing »
OK
« you can switch the »Reference Plus Demo«
function on or off.
The left half of the screen shows the programme with the
»Reference Plus« function switched on, on the right side the
function is switched off.
Concluding the settings
1
Press »
i
« to finish the settings.
SETTINGS
______________________________________________
Picture
Brightness
Contrast
Colour
Sharpness
Noise reduction
Off
Reference Plus
On
●
F
Back
●
i
Exit
Picture
Brightness
Contrast
Colour
Sharpness
Noise reduction
Off
Reference Plus
On
●
F
Back
Ref. Plus Demo
●
i
Exit
Picture
Brightness
Contrast
Colour
Sharpness
Noise reduction
Off
Reference Plus
On
●
F
Back
●
i
Exit