GN Netcom 5830 - Manual (Page 24)

21
Dial Mode (Tone/Pulse)
1 Make sure the handset is off.
2 Press * * *. You will hear a tone and the
IN USE light will flash.
3 Press 0. If the IN USE light goes on, you have
selected TONE. If the light goes off, you have
selected PULSE. Press 0 again to change your
selection.
4 Press # to save your selection
— OR —
Press * to exit without saving.
FEA
TURE SETUP – BASE
FEA
TURE SETUP – BASE
j j j
j j j p p p
j j j
5830_CIB_1ATT 8/14/02 9:47 PM Page 21