GE Monogram 225D1804P011 - Manual (Page 9)

9
How
TurboCool ™
works
TurboCool rapidly cools
the refrigerator compartment in
order to more quickly cool foods.
Use TurboCool when adding
a large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature
or when putting away warm leftovers. It can
also be used if the refrigerator has been
without power for an extended period.
Once activated, the compressor will turn on
immediately and the fans will cycle on and
off at high speed as needed for 8 hours.
The compressor will continue to run until
the refrigerator compartment cools to
approximately 34°F (1°C), then it will cycle
on and off to maintain this setting. After
8 hours, or if TURBOCOOl is pressed again,
the refrigerator compartment will return
to the original setting.
Other Controls
Stainless Steel Refrigerator
How to use
TurboCool
1 Press TURBOCOOl. The refrigerator
temperature display will show TC.
2 After TurboCool is complete,
the refrigerator compartment
will return to the original setting.
NotES:
• The refrigerator temperature cannot
be changed during turboCool.
• The freezer temperature is not affected during
turboCool.
• When opening the refrigerator door during
turboCool, the fans will continue to run if
they have cycled on.
Door Alarm The door alarm will sound
if either door is open for more than
2 minutes. The beeping sound will
stop when you close the door.