GE Capital 24959 - Manual (Page 17)

17
Troubleshooting
Remote does not operate your product
1. Select the mode for the product you want to
control.
2. Program the remote with a new code.
3. Install new batteries in the remote. (You might
have to reprogram your remote after installing
new batteries.)
4. If these steps do not work, the remote might not
be compatible with your product.
Remote does not operate some
features of your product
1. Program remote with a new code.
2. If this does not work, your remote might not be
able to operate all features of your product or
the button names might be different than your
product.
Indicator blinks after you program a
product code
1. This means the remote did not accept the code.
2. Try to program the code again or try a different
code.
Lost Your Codes?
Enclosed with this remote is a sticker on which
you should write the codes for each device you
programmed. Apply the sticker to the back of
the remote or somewhere convenient for future
reference.
Also on the sticker is our website address which,
should you lose your codes or programming
instructions, you can fi nd available on our website:
www.jascoproducts.com