Epson EMP-X3 - Manual (Page 42)

37 List of Functions
"Extended" Menu
Sub-menu Function
Display This lets you make settings related to the projector's display.
Message:
Sets whether the input source name or colour mode name or a message is displayed on the screen ("On") or not displayed ("Off") at times such
as when the input source or colour mode is changed or when no image signals are being input.
Display Background:
Sets the screen status to "Black", "Blue", or "Logo" when no image signals are being input.
Startup Screen:
The startup screen (the image projected when starting the projector) is displayed when starting (On)/ or not displayed when starting (Off). The
setting is enabled after turning the power supply off and then back on.
A/V Mute:
You can choose the Screen display in A/V mute from "Black", "Blue", and "Logo".
User’s Logo Change the user's logo that is displayed as a background and displayed during A/V Mute. s p.64
Projection Sets the projection position for the projector. s p.56
"Front" "Front / Ceiling" "Rear" "Rear / Ceiling"
By holding down the [A/V Mute] button for about 5 seconds, you can change the projection setup in the following ways.
Front
Front Ceiling
Rear Rear Ceiling
Screen shot from EMP-X3 Screen shot from EMP-82/62