Stovax Marlborough & Stockton Coal Effect Stove Range - Manual (Page 12)

12
Medium Ceramica
3.9 Place the flame baffle onto the shelf at the rear of the tray
and push up against the rear ledge, see Diagram 7.
AR0365
7
3.10 Locate the front coal moulding in front of the flame baffle
ensuring that the end legs sit flat against the burner skin, see
Diagram 8.
AR0366
8
3.11 Place three large coals on the front coal so that they lean
against the flame baffle, and the four large coals on the
flame baffle so that they sit on the fingers, see Diagram 9.
AR0367
9
3.12 Place two small coals at each end of the front coal so that
they lean against the flame baffle, and a further two large
coals on the flame baffle, one at each end, see Diagram 10
AR0368
10
3.12 Place five small coals along the rear of the flame baffle,
resting against the rear ledge, see Diagram 11.
AR0369
11
3.14 Ensure that the fibreglass seal on the back of the door is intact,
locate the door on the four studs and slide back to the firebox.
Secure in place using the four dome nuts and the tool
supplied, do not over tighten the nuts, see Diagram 12. Keep
the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS
REMOVED OR WHEN THE GLASS IS BROkEN.
AR0390
12
INSTALLATION INSTRUCTIONS
INSTALLATION