Лк н – Graco 8486 User Manual

Page 24

1. For ease of installation,

extend LATCH to its
maximum length.

2. Place the car seat firmly

against the back of a
forward-facing vehicle
seat.

3. Thread LATCH

through the belt
path normally used
for the vehicle seat
belt

Belt must lay flat
and not be twisted.

4. Hook LATCH

Connectors to vehicle
lower anchors. Pull
firmly on Connectors
to be sure they are
attached

5. Tighten LATCH by

pushing down hard on
car seat and pulling the
adjustment belt

6. NEVER put two LATCH

connectors on one
vehicle LATCH anchor
unless specifically
allowed by the
manufacturer

6.2.2 With LATCH