Preparing to install the refrigerator, Installation refrigerator instructions, Model gbc12iax – GE GBC12IAX User Manual
Page 8: Important
Installation
Refrigerator
Instructions
Model GBC12IAX
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
— Save these instructions
for local inspector’s use.
•
IMPORTANT
— Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
20 minutes
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation
is not covered under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
the refrigerator door and freezer drawer or door
(depending on model) can be removed.
• To remove the refrigerator door, see Step 1
in the Reversing the Door Swing section.
• To remove the freezer door, see Steps 2
and 3 in the Reversing the Door Swing section.
TOOLS YOU MAY NEED
Adjustable Wrench
Phillips-Head Screwdriver
8
10 mm Socket Ratchet/Driver
Thin-Blade Screwdriver
1/8
″ Drill Bit and
Electric or Hand Drill
5/16
″ or 8 mm Nut Driver