Generac Power Systems Transfer Switches and Accessories - Manual (Page 6)

6
INDUSTrIAL POWEr frOM GENErAC’S
MODULAr POWEr SySTEMS
for applications requiring greater amounts of standby
power, the mQt100 and mQt150 models are ideal.
available through your local Generac industrial
dealer, the output of these gensets can be combined
to form a Generac modular power system (mps).
mQt series modular power systems are building
blocks that link together to combine the power output
equal to one large single generator. with the ability to
parallel up to ten 100 kw units or up to ten 150 kw
units, these generators can satisfy higher end
requirements ranging from 100 to 1500 kw.
redundancy
because each mQt generator within the system backs up the others, critical loads receive
extra protection and building managers enjoy greater peace of mind.
Serviceability
mQt generators use modified high volume truck or industrial engines that can be serviced
using readily available, cost-effective parts. since each generator backs up the others,
servicing can be accomplished without losing backup power to critical loads.
Scalability
a Generac modular power system can be expanded as facilities grow. there is no need
to replace the system if future power requirements exceed projections and no need to
over-spend on a larger system that might never be fully utilized.
Flexibility
mps modules provide unmatched flexibility because they can be placed in any configuration
side by side, end to end, together or apart. they are light enough for most rooftop
applications and the lower weight eliminates the need for heavy-duty cranes and material
handlers during installation.
THE GENErAC
INDUSTrIAL DEALEr
NETWOrk
installation, start-up and servicing of
modular power systems require
specialized knowledge and expertise.
Generac industrial dealers have
factory-trained personnel to ensure
that your customers get the best
possible solution, fast delivery,
professional installation and start-up.
if a customer needs a diesel-powered
generator or a generator size that is
beyond the scope of the Qt series
line, a Generac industrial dealer can
meet requirements up to 9,000 kw.
Generac industrial dealer certified
service technicians are fully trained
on all Qt series generators and
can provide your customers with
hassle-free maintenance and
service agreements.
GEMINI ® TWIN PACk
fOr HIGHEST POWEr
DENSITy
when space is at a premium and
reliability is critical, no other
manufacturer comes close to
Generac’s Gemini twin pack.
part of the mps family, these units
feature two 500 kw generators inside
a single, weather resistant and sound
attenuated enclosure. the exclusive
powermanager™ control system
allows for combining the output of
large, single engine gensets with a
significant improvement in reliability.
• Smaller footprint than many
comparable single engine models
• Built-in redundancy for superior
system reliability
• Scalable solution – up to seven
Gemini gensets can be paralleled
without additional switchgear for
up to 7,000 kw in total output
• Fast production turn around –
often within weeks
• Easily serviced with common parts
Modular Power SySteMS • GeMini • Bi-Fuel
BI-fUEL ™
Longest run Times in the Industry
Generac bi-fuel generators start on diesel fuel and add natural gas as load is applied.
during an outage, they typically operate on a mixture of up to 70% natural gas and
30% diesel fuel (contact factory for product specifications). if the natural gas supply is
interrupted, the generator automatically switches to 100% diesel without any power drop
during the transition.
Benefits of Bi-fuel
• Dramatically increased run times
• Minimal on-site fuel storage
• Reduced fuel maintenance
• Reduced environmental risk
• Lower particulate and NOx emissions