Grandstream Networks BudgeTone-100 User Manual
Page 11

11
BudgeTone-100 User Manual Grandstream Sdn Bhd
1. Pick up handset or press SPEAKERPHONE button, and then enter the phone
numbers
2. Press the SEND/REDIAL button directly to redial the number just called.
Once pressed, the last dialed number will be displayed on the LCD as the
corresponding DTMF tones are played out and an outgoing call is sent.
3. Browse the CALLED history and press the SEND/REDIAL button. Pick up
the handset or press the speakerphone button, then press the “Called” button
to browse thru the last 10 numbers dialed out. Once the desired number is
identified and displayed on the LCD screen, press the SEND/(Re)Dial button
and a new call to that displayed number will be sent out immediately.
4.
Browse the CALLERS history and press the SEND/REDIAL button Pick up
the handset or press the speakerphone button, then press the “Callers” button
to browse thru the last 10 caller IDs received. Once the desired number is
identified and displayed on the LCD screen, press the SEND/(Re)Dial button
and a new call to that displayed number will be sent out immediately.
Examples:
If the phone is configured with a user part of “1000” with a SIP proxy,
then to dial the user extension “1008”, simply just dial 1008 and then press the
“SEND/(Re)Dial” button.
If the phone is configured with a regular PSTN number 16172223333 with
a service provider’s server, then to dial any other PSTN number (say,
16266667890) will be simply to dial that number (16266667890) as if you were
calling from a regular analog phone, followed by pressing the “SEND/(Re)Dial”
button.
If the “SEND/(Re)Dial” button is not pressed, the phone will wait for
about 5 seconds before initiating the call.
4.3.2 Make Calls using IP Address
Direct IP calling allows 2 phones to talk to each other in an ad hoc fashion
without a SIP proxy. VoIP calls can be made between two phones if
•
both phones have public IP addresses, or
•
both phones are on a same LAN using private or public IP addresses, or
•
both phones can be connected through a router using public or private IP
addresses.