GE RM94926 - Manual (Page 6)

5
Programming For TV
Most GE, RCAand ProScan TVs will not require pro-
gramming. Check to see if your TV responds to the
remote before you begin programming.
1. Manually turn on the
TV. Find the three digit code
for your TV in the code list
below.
2. Press and hold the
CODESEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE SEARCH
button.
3. Press and release the TV
button (The INDICATOR
LIGHT will blink then
remain lit.
4. Enter the code using the
Number Buttons. After your
code is entered, the INDI-
CATOR LIGHT will turn
off. If the code is not valid,
the INDICATOR LIGHT
will blink. Check the code
list and repeat process.
5. Aim the remote at your
TV and press the ON•OFF
button. Your TV should turn
off.
NOTE: If your TV does not
respond, try all the codes for
your brand. If the codes do
not work, or your brand is
not listed, try the Code
Search method on Page 16.
6. With your TV on, press CHAN+ (CHANNELUP).
If the TV responds, no further programming is
required.
7. Enter your code here for easy reference.
TV CODE LIST
94926 Revised Size 2/25/02 4:13 PM Page 6