Graco NUVI R NVI 200 - Manual (Page 3)

nüvi 00 Series set up and go! guide
Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota
prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other
Garmin dashboard or friction mounting options should be used. See page 12 for more details.
Step 1: Mount the nüvi
Select a suitable location to mount the nüvi on your windshield. Clean and dry the
suction cup and the selected area of your windshield.
1. Plug the power cable into the back of the nüvi.
2. Fit the ball on the end of the mount into the
round socket on the cradle and press firmly
until it snaps together.
3. Place the suction cup on the windshield, and
flip the lever back toward the windshield.
4. Press the bottom of the nüvi into the cradle,
and snap the top of the nüvi into place.
5. Plug the power cable into a power outlet
in your vehicle. Your unit should turn on
automatically if it is plugged in and your
vehicle key is turned to ON/ACC.
Ways to Charge the nüvi
Connect the vehicle power cable to the nüvi
and to a power outlet in your vehicle.
Connect an AC adapter (optional accessory)
to the nüvi and a wall outlet.
•
•
Cradle
Suction cup mount
Vehicle power
cable