Power supply – Grundig World Receiver G2000A User Manual
Page 5

POWER SUPPLY
Batteries
•
Open the battery compartment and insert 3 alkaline 
batteries of the type R6, UM 3 or AA. 
•
Remove the batteries when they are exhausted or if they 
are not going to be used for a long period of time. 
Note: If the DC 4.5 V socket is in use, the battery supply 
will switch off automatically. 
Note on Environmental Protection 
Do not throw exhausted batteries in the household refuse. 
Hand over the old batteries to you deader or public 
collecting when buying new ones. 
 
Warning for weak batteries: 
When the batteries run low, the sound volume declines 
gradually. The indication
appears on the display.
Continued operations with low batteries cause the radio to 
turn off automatically, other malfunctioning and losing 
programmed time settings and preset radio stations. In this 
case, remove the batteries and press a paper clip through 
the RESET hole. 
 
Readjust the time settings and the present radio stations. 
To prevent that the radio is switched on accidentally, use 
the LOCK-switch when packing the radio or putting it away. 
 
 
 
 
 
AC Main Adapter (not included) 
You can connect the set to the mains using 
a mains adapter. 
Only use a mains adapter, which supplies 
4.5V DC with the negative pole at the 
center pin of the plug. 
 
Before connecting the mains adapter 
•
Check that the mains voltage indicated on the type 
plate of the adapter matches your local mains voltage. 
•
If the mains adapter equipped with a voltage selector, 
set this to the local voltage. 
•
Connect the mains adapter to the DC 4.5V socket of 
the set and to the wall socket. 
 
Power failure 
•
If the power supply is interrupted, the programmed time 
settings and preset radio stations will be kept in the 
memory for 10 min. or more. 
•
If the AC power is disconnected from the 4.5 DC 
socket, the batteries (if present) will take over the 
supply. 
